Action
Sets the AVR-Hardware (PORTs, PINs) attached to the Drive and resets the Drive.
Syntax
bErrorCode = DRIVEINIT()
Remarks
BErrorCode |
A Byte Variable, which is assigned with the error code of the function |
Set the Ports and Pins attaching the Drive for Input/Output and give initial values to the output-pins. After that the Drive is reset.
Which action is done in this function depends of the drive and its kind of connection to the AVR. The functions returns 0 if no error occurred.
For Error code see section Error codes.
See also
DriveCheck, DriveReset , DriveGetIdentity , DriveWriteSector , DriveReadSector, AVR-DOS File System
ASM
Calls |
_DriveInit |
|
Input |
none |
|
Output |
r25: Errorcode |
C-Flag: Set on Error |
Partial Example
Dim bError as Byte
bError = DriveInit()